FREE CANADIAN SHIPPING on all orders over $95* Processing times within a few hours!
FREE CANADIAN SHIPPING on all orders over $95* Processing times within a few hours!
TO-PA-70
Used with Tormek leather honing wheels
PA-70 Honing Compound is used together with Tormek leather honing wheels. The unique qualities of the leather in combination with the honing compound effectively remove the burr that occur during sharpening without damaging the edge. At the same time, the honing compound also polishes the bevel to its final finish.
PA-70 Honing Compound consists of a combination of microabrasives and polishing components, and has an average grit of 3 microns. For best results, always use honing compound when honing on a leather honing wheel. One application is enough for 5 to 10 tools. The leather becomes softer and more effective every time you use the honing compound. And your tools will be sharper than ever.
Apply a thin string of PA-70 Honing Compound to the leather honing wheel before starting the machine. Turn the honing wheel by hand. Start the machine and distribute the honing compound by lightly pressing the tool against the wheel. Allow the paste to penetrate the leather.
When you have a new leather honing wheel, saturate it with the light machine oil included first to give it the right texture and make it capable of absorbing the honing compound. If you work in a dry climate, after a while you might need to impregnate the honing wheel again with a few drops of oil before using the honing compound. Don't let the honing compound dry out on the leather honing wheel, apply more oil if needed.
Shipping weight 0.09 kg (0.2 lb)
Yellow
Aluminum oxide, Petroleum distillate, Ammonia
Aluminum tube
To see all patents, please visit tormek.com/patents
Watch this episode of Tormek's sharpening classes where Wolfgang and Sébastien teach you the basics of honing.
PA-70 Honing Compound comes fully assembled and ready to use. One tube contains 70 g (0.15 lb) of honing compound.
