CA   USA  

FREE CANADIAN SHIPPING on all orders over $95* Processing times within a few hours!

Search

AngleMaster

TO-WM-200

WM-200 AngleMaster

Set the correct sharpening angle easily and precisely

The Tormek WM-200 AngleMaster has several smart features. You can use it to set the jig before sharpening, or to measure an existing bevel angle of a tool. It can also be adjusted to the diameter of the grinding wheel, and you can easily set the sharpening angle for sharpening on the side of a diamond grinding wheel as well.

OVERVIEW

Why WM-200 AngleMaster?

  • Measures the existing bevel angle of the tool.
  • Set the jig to the desired sharpening angle before sharpening.
  • Easy to use.
  • Works on grinding wheels from 150 mm (5 7/8") to 250 mm (9 7/8") in diameter.
  • Works with the Tormek T-8, Tormek T-4 and older models.

Sharpen at exactly the right angle

The sharpening angle can be set from 10° to 75° with the WM-200 AngleMaster. The AngleMaster is designed to work on all grinding wheels with a diameter from 150 mm (5 7/8") to 250 mm (9 7/8"). So you get an accurate setting even if you have a grindstone that's been worn down a lot.

The right angle at your fingertips

The WM-200 AngleMaster has two magnets so you can easily place it on the machine so that it's always close to hand. This applies to all Tormek models except for the 1200 and T-3. On the Tormek T-4, you can place the AngleMaster on the machine plate, which is made of metal; and on the Tormek T-8 you can place it on the plate mount included.

 

SPECS AND DETAILS

Weight

Shipping weight 0.10 kg (0.22 lb)

Color

Gray/black

Material

Plastic

Warranty

2-year warranty

Made in Sweden

VIDEO

How to use the WM-200 AngleMaster

This short video shows you how the WM-200 AngleMaster works and how you can use it for both chisels and knives.

INCLUDED IN THE BOX

The WM-200 AngleMaster comes fully assembled and ready to use.

  • Instructions for the WM-200 AngleMaster.

Customer Reviews

Based on 6 reviews
83%
(5)
17%
(1)
0%
(0)
0%
(0)
0%
(0)
K
Kenneth Romanyshyn

AngleMaster

P
Pete Bifano
What's the bevel angle?

So well designed and made. I love that it has magnets to keep in handy stuck to the machine. If you are "fixing" a bad edge or starting from scratch. Get this. Quality and great customer service at Axeman

W
Wilson Blais
Un outil essentiel!!!

Un outil essentiel pour le calcul précis de l'angle de mes lames!

E
Eric Grummisch
Well made accessory

A very nice, useful gauge for both measuring the angle of a bevel, and setting the correct angle for grinding.
I would have preferred to see it made of aluminum, although it is made of a sturdy plastic or nylon material that seems to do the job. I did know that to be the case when I ordered it.
It is sometimes difficult to position the gauge to set the grinding angle, for instance, when sharpening scissors with the scissors jig. It would be easier if the measuring arms were longer, as the bulk of the unit can prevent the arms from seating and it can be difficult to find where to take the measurement.
All in all, though, a well made and very handy accessory to have.

R
Ron cameron
Great

Like how fast recurved order and on time

Search