Fièrement canadienne et détenue par des secouristes, expédition rapide, service à la clientèle à l'ancienne!
TK22RPRBK
A powerhouse built for high-pressure operations, the Fenix TK22R PRO Tactical Flashlight unleashes a massive 4200 lumens and throws a long-range beam up to 1444ft (440m). Utilizing a 3-in-1 smooth reflector design paired with three high-performance LEDs, it delivers the raw brightness and long-distance visibility required in critical situations.
Deployment is intuitive thanks to the patented FlexiSensa control toggle switch paired with dual tail switches. Users can quickly select Tactical mode to limit outputs strictly to Turbo, Low, and Strobe, switch to Duty mode to access all brightness levels including Instant Turbo, or engage Lockout mode to prevent accidental activation.
Engineered for extreme conditions, the TK22R PRO features an internal dual-spring suspension to withstand severe impact and recoil. Complete with a tungsten-tipped steel strike bezel, an included 5500mAh battery, and a fast-charging USB Type-C port, this tactical flashlight provides rugged, dependable performance for law enforcement, military, and security personnel.


On
With the light locked and the tactical switch fully pressed, turn the toggle switch from Lockout mode to any mode to turn on the flashlight.
With the light unlocked and turned off, tap the tactical switch to turn on the light momentarily or fully press the tactical switch to turn on the light constantly.
Off
With the light unlocked and turned on, fully press the tactical switch or turn the toggle switch to Lockout mode to turn off the flashlight.
Mode Switching
With the light head facing upward, turn the toggle switch to switch between three modes (from left to right) : Duty mode→Lockout mode→Tactical mode.
Output Selection
Duty mode: With the light turned on, single click the functional switch to cycle through Eco→Low→Med→High.
Tactical mode: With the light turned on, single click the functional switch to select between Eco and Turbo.
Instant Turbo
With the light turned on, press and hold the functional switch for 0.5 seconds to enter Instant Turbo and lock it. Single click the functional switch to return to the previously used output.
With the light turned off, press the functional switch to enter Turbo. Release the functional switch and the light will go off.
*This operation is only applicable in Duty mode.
Instant Strobe
With the light turned on, press and hold the functional switch for 0.5 seconds to enter Instant Strobe. Single click the functional switch to exit Strobe and return to the previously used output.
With the light turned off, press the functional switch to enter Instant Strobe. Release the functional switch and the light will go off.
*This operation is only applicable in Tactical mode.
Intelligent Memory Circuit
The flashlight automatically memorizes the previously used output. When turned on again, the previously used output will be recalled.
|
Type |
Dimensions |
Nominal Voltage |
Usability |
|
|
Fenix ARB-L21-5500 |
21700 |
3.6 V |
Recommended |
√√ |
|
Fenix ARB-L21-5500U |
21700 |
3.6 V |
Recommended |
√√ |
|
Fenix ARB-L21-5000 V2.0 |
21700 |
3.6 V |
Recommended |
√√ |
|
Fenix ARB-L21 Series |
21700 |
3.6 V |
Recommended |
√√ |
*Do NOT use an 18650 or 16340 battery.
*Do NOT mix batteries of different ages, capacities, or types.
*21700 Li-ion batteries are powerful cells designed for commercial applications and must be treated with caution and handled with care. Using low-quality batteries or mishandling batteries (such as short-circuiting or overheating) could lead to combustion and jeopardize the safety of users and property. Any adverse effects resulting from the use of low-quality batteries are not covered by any Fenix warranty or liability. Using quality batteries with circuit protection will reduce the potential for combustion or explosion.
Unscrew the light head and insert the battery with the anode side (+) towards the light head, then screw the light head back on.
Turn off the flashlight and open the flip cover to reveal the USB Type-C charging port.
Connect the USB Type-C end of the charging cable to the flashlight.
The charging indicator below the flip cover will display red while charging and will turn green when fully charged.
Once charging is completed, be sure to unplug the charging cable and close the flip cover.
Note:
The flashlight cannot be operated while charging.
*These features only work with a Fenix ARB-L21 series battery.
With the light turned off, single click the functional switch to check the battery level and the tail battery level indicator will last for 3 seconds.
*If the light is locked and the tactical switch is fully pressed, the tail battery level indicator will light up and show the current battery level until the tactical switch is disengaged.
*This feature only works with a Fenix ARB-L21 series battery.
The flashlight will accumulate a lot of heat when used at high output levels for extended periods. When the flashlight reaches a temperature of 60°C/140°F or above, it will automatically step down a few lumens to reduce the temperature. When the temperature drops below 60°C/140°F, the flashlight will gradually recall the preset output level.
When the voltage level drops below the preset level, the flashlight is programmed to downshift to a lower brightness level until Low output is reached. When this happens in Low output, the flashlight blinks 3 times every 5 minutes to remind users to recharge or replace the battery in a timely manner. To ensure normal use, the flashlight will not turn off automatically and will work till the battery runs out or the battery protection is triggered.
*This feature only works with a Fenix ARB-L21 series battery.
A:
Utilizes three Luminus SFT42R LEDs.
Fenix does not provide LED replacement services for the time being, and users are not recommended to replace the LEDs independently, which may affect product performance and cause product damage.
A: 6500K.
A: The operating voltage is 3.0V - 4.2 V. The maximum operating voltage range is 3.0V ~ 4.35V.
A: Yes. The TK22R Pro features a USB Type-C port for convenient charging. The charging time is approximately 1.5 hours from depleted to fully charged.
A: There are two reasons:
A: The reasons that may cause the light to flicker, shine intermittently or even fail to illuminate:
A: It is recommended to use a Fenix ARB-L21-5500 battery or other batteries of the Fenix ARB-L21 series. Other batteries are not recommended. As an unmatched battery may cause the flashlight to fail to work normally.
A: