Fièrement canadienne et détenue par des secouristes, expédition rapide, service à la clientèle à l'ancienne!
Fenix HT18R V2
The Fenix HT18R V2 Long Range Hunting Light is a powerhouse built for hunters and outdoor professionals. With 3700 lumens and a beam reaching 3,609 feet, it delivers unmatched long-distance visibility. A built-in USB-C port recharges the included 6000mAh battery in just 1.5 hours, while instant Turbo and Strobe, plus Beacon and SOS modes ensure you’re ready for any situation. Dual side switches provide quick control, and IP68 waterproofing with 1.5-meter impact resistance guarantees durability. For added versatility, the HT18R V2 works with AOF-18 red, green, yellow, and blue filters, making it the ultimate long-range hunting companion.
Q: What kind of LED is used in HT18R V2.0?
A: Utilizes one Luminus SFT90 LED with a lifespan of 50,000 hours.
Q: What is the color temperature of HT18R V2.0?
A: Around 6500K.
Q: What is the working voltage of HT18R V2.0?
A: 3.0 V - 4.2 V.
Q: Is HT18R V2.0 rechargeable? How long is the charging time?
A: Yes, the HT18R V2.0 is rechargeable with its USB Type-C charging port. The charging time is approximately 1.5 hours from depleted to fully charged with a 9 V/3 A charging adapter. When using a 5 V/3 A charging adapter that does not support fast charging, the charging time is approximately 2.5 hours.
Q: How to prevent accidental activation of the HT18R V2.0?
A: Solution 1: Turn off the flashlight and unscrew the tail cap a few turns or take out the battery.
Solution 2: Fully press the tactical switch and the functional switch simultaneously for 3 seconds to lock the flashlight.
Q: Why does the HT18R V2.0 downshift to a lower mode after being used for a while and the higher mode cannot be selected?
A: There are two reasons:
1. Intelligent Overheat Protection
The flashlight will accumulate a lot of heat when used at high output levels for extended periods. When the flashlight reaches a temperature of 60°C or above, the flashlight will automatically step down a few lumens to reduce the temperature.
2. Low-voltage Warning
When the voltage level drops below the preset level, the flashlight is programmed to downshift to a lower brightness level until the lowest output is reached.
Q: Why does the HT18R V2.0 sometimes flicker?
A: The reasons that may cause the light to flicker, shine intermittently or even fail to illuminate:
1. Poor battery level.
Solution: Recharge or replace the battery.
2. The contact or contact point of the battery or flashlight is dirty.
Solution: Clean the contact points with a cotton swab soaked in rubbing alcohol.
If the above methods don't work, please contact your authorized distributor.
Q: What are the optional accessories for HT18R V2.0?
A:
Included lanyard & holster
AER-05 tactical remote pressure switch
ALG-18 flashlight ring
AOF-18 filer pouch
Filter adapters of HT18R & HT18R V2.0